Paints & Coatings
ACumist® A-18
Micronized high density, oxidized polyethylene (HD OX PE) homopolymer
Larger particle size than ACumist A 12 for water based coating. Use in paper coatings to improve antiblocking, slip and release
General Information
- Application
- Powder Coatings
- Water-Based Coatings
- Solvent Based Coatings
- Performance Function
- Mar Abrasion-Scratch Resistance
- Physical Form
- Micronized Powder
- Product Family
- Oxidized High-Density PE
- Size
- 16.0 to 19.0
Typical Uses
- Coatings
- Mar Abrasion-Scratch Resistance
Properties
- Acid Number
- 26 to 40
- Density
- 0.99
- Drop Point Mettler
- 137 °C (279 °F)
- Hardness
- < 0.5 at 25 °C
- Hide Drop Point
- No
Standards & Approvals
- Plastic Pipe Institute/NSF*
- No
- FDA Direct Food Additives Approval*
- No
- FDA Indirect Food Additives Approval*
- Yes
Other
- Other Notes
- * The regulation includes a reference to this product. This does not imply blanket approval. End users should refer to the specific FDA regulation for details including extraction limitations and restrictions on the use of this product.
General Information
- Application
- Powder Coatings
- Water-Based Coatings
- Solvent Based Coatings
- Performance Function
- Mar Abrasion-Scratch Resistance
- Physical Form
- Micronized Powder
- Product Family
- Oxidized High-Density PE
- Size
- 16.0 to 19.0
Typical Uses
- Coatings
- Mar Abrasion-Scratch Resistance
Properties
- Acid Number
- 26 to 40
- Density
- 0.99
- Drop Point Mettler
- 137 °C (279 °F)
- Hardness
- < 0.5 at 25 °C
- Hide Drop Point
- No
Standards & Approvals
- Plastic Pipe Institute/NSF*
- No
- FDA Direct Food Additives Approval*
- No
- FDA Indirect Food Additives Approval*
- Yes
Other
- Other Notes
- * The regulation includes a reference to this product. This does not imply blanket approval. End users should refer to the specific FDA regulation for details including extraction limitations and restrictions on the use of this product.
- Size : 16.0 to 19.0
- Physical Form : Micronized Powder
- Product Family : Oxidized High-Density PE
- Performance Function : Mar Abrasion-Scratch Resistance
- Application : Powder Coatings|Water-Based Coatings|Solvent Based Coatings
- Coatings : Mar Abrasion-Scratch Resistance
- Acid Number : 26 to 40
- Hide Drop Point : No
- Drop Point Mettler : 137 °C (279 °F)
- Hardness : < 0.5 at 25 °C
- Density : 0.99
- FDA Indirect Food Additives Approval* : Yes
- FDA Direct Food Additives Approval* : No
- Plastic Pipe Institute/NSF* : No
- Other Notes : * The regulation includes a reference to this product. This does not imply blanket approval. End users should refer to the specific FDA regulation for details including extraction limitations and restrictions on the use of this product.
Data Sheet
Name
Description
File Size
Date
Size
ACumist® A-18, Larger particle size than ACumist A 12 for water based coating. Use in paper coatings to improve antiblocking, slip and release.
5.18 KB
6/18/2021
PDF 5.18 KB
Name
Description
File Size
Date
Size
ACumist® A-18, Larger particle size than ACumist A 12 for water based coating. Use in paper coatings to improve antiblocking, slip and release.
5.18 KB
6/18/2021
PDF 5.18 KB