https://industrial.honeywell.com/us/en/search-results.html
Outage Notification: This website will undergo a planned maintenance outage on Saturday, June 5, from 12:30-2:30 p.m. EDT (6:30-8:30 p.m. UDT). We regret any inconvenience this may cause.

Plastics & Rubber

ACumist® D-9

Micronized low density polyethylene (LDPE) Homopolymer

Request Free Samples
Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs.

General Information

  • Type
    • Styrenics
    • WB Flexo
    • Screen Inks
    • SB Gravure
  • Physical Form
    • Micronized Powder
  • Product Family
    • PE Homopolymer
  • Size
    • 8.0 to 10.0
  • Application
    • EPS
    • Pressure Sensitive
    • Reactive
    • Hot Melt
    • Solvent Borne
    • Tapes
    • Water Borne
  • Performance Function
    • Nucleation
  • Industry
    • Plastics
    • Adhesives

Properties

  • Acid Number
    • Nil
  • Hide Drop Point
    • No
  • Hardness
    • < 2.0 at 25 °C
  • Density
    • 0.94
  • Drop Point Mettler
    • 118 °C 244 °F

Standards & Approvals

  • FDA Indirect Food Additives Approval*
    • Yes
  • Plastic Pipe Institute/NSF*
    • No
  • FDA Direct Food Additives Approval*
    • No

Other

  • Other Notes
    • * The regulation includes a reference to this product. This does not imply blanket approval. End users should refer to the specific FDA regulation for details including extraction limitations and restrictions on the use of this product.

Sampling

  • Sample Products
    • Yes

General Information

  • Type
    • Styrenics
    • WB Flexo
    • Screen Inks
    • SB Gravure
  • Physical Form
    • Micronized Powder
  • Product Family
    • PE Homopolymer
  • Size
    • 8.0 to 10.0
  • Application
    • EPS
    • Pressure Sensitive
    • Reactive
    • Hot Melt
    • Solvent Borne
    • Tapes
    • Water Borne
  • Performance Function
    • Nucleation
  • Industry
    • Plastics
    • Adhesives

Properties

  • Acid Number
    • Nil
  • Hide Drop Point
    • No
  • Hardness
    • < 2.0 at 25 °C
  • Density
    • 0.94
  • Drop Point Mettler
    • 118 °C 244 °F

Standards & Approvals

  • FDA Indirect Food Additives Approval*
    • Yes
  • Plastic Pipe Institute/NSF*
    • No
  • FDA Direct Food Additives Approval*
    • No

Other

  • Other Notes
    • * The regulation includes a reference to this product. This does not imply blanket approval. End users should refer to the specific FDA regulation for details including extraction limitations and restrictions on the use of this product.

Sampling

  • Sample Products
    • Yes
  • Type : Styrenics|WB Flexo|Screen Inks|SB Gravure
  • Physical Form : Micronized Powder
  • Product Family : PE Homopolymer
  • Size : 8.0 to 10.0
  • Application : EPS|Pressure Sensitive|Reactive|Hot Melt|Solvent Borne|Tapes|Water Borne
  • Performance Function : Nucleation
  • Industry : Plastics|Adhesives
  • Acid Number : Nil
  • Hide Drop Point : No
  • Hardness : < 2.0 at 25 °C
  • Density : 0.94
  • Drop Point Mettler : 118 °C 244 °F
  • FDA Indirect Food Additives Approval* : Yes
  • Plastic Pipe Institute/NSF* : No
  • FDA Direct Food Additives Approval* : No
  • Other Notes : * The regulation includes a reference to this product. This does not imply blanket approval. End users should refer to the specific FDA regulation for details including extraction limitations and restrictions on the use of this product.
  • Sample Products : Yes
Technical Note
Name
Description
File Size
Date
Size
Typical properties
application/pdf 88.67 KB
5/5/2022
88.67 KB
Data Sheet
Name
Description
File Size
Date
Size
ACumist® D-9, Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern.
application/pdf 5.26 KB
6/18/2021
5.26 KB
Name
Description
File Size
Date
Size
Typical properties
88.67 KB
5/5/2022
88.67 KB
ACumist® D-9, Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern.
5.26 KB
6/18/2021
5.26 KB